Lift loads, lower loads – scenes procedures that result in mechanical effects, models control, there is nothing you could not elegantly achieve with a DC motor and controller.
DC motors with maximum 24V 2.5A supply may be controlled with the 3901A-H. The controller will operate in continuous mode (forward/reverse variable speed) or position mode, driving to a fixed position with positions feedback). Additionally, limit switch inputs are provided to stop the motor when the switch is operated, and optionally change direction.
- DMX512/1990, DMX512A, DMX RDM
- 1 Channel (positioning), 2 channel (continuous mode)
- Inputs: Limit R/L, speed, position (0 … 8.4 VDC)
- Outputs: Motor 24V DC 2.5A max,
reference output 15V max. 10mA
- Power supply: 24V DC
- Dimensions: DIN rail mounted device, width 5U
Important notice: You can configure the 3901A-H via DMX RDM. Alternatively, the DMX start address, DMX personality and DMX HOLD mode can be configured using a start address board 3000P, 3003P, 3005P or 3006P. Start address boards can be used for all of our products. Start address boards must be purchased separately.